Clean hands/surface to be used.
Take a wax from a pot and use a hairdryer on a low setting to warm up or place in warm water (it should feel like Blu Tack).
Move the wax around in your fingers and roll into a ball ensuring a smooth surface.
FOR SINGLE SIDED PRINTS
Put the branded paper in the box on a hard surface (you can tape down to secure). Place the wax lightly onto the paper to secure and push their finger/thumb into the wax (the harder you push the thinner it’ll be).
FOR DOUBLED SIDED PRINTS
Follow the above steps then lightly press the wax on a finger or thumb and then push the other finger/thumb onto it then carefully separate them.
Again, the more pressure you apply the thinner it'll be.
Final Checks
Repeat the process as all three waxes will need to be completed.
It is important that you check the quality of the waxes before returning and that you are happy with them as the final casting will be an exact copy.
As a rule, if you can see the print to the naked eye then they will cast successfully. If unsure, please contact me with images.
The waxes can be used again and again so if you're not happy with the impression you can reheat and repeat the process.
